Incandescent Fixtures & Accessories for Atlantic City, NJ & New York

• Accepts 375w, 575w, or 750w HPL tungsten lamp. 
• Lens tube options: 5º, 10º, 19º, 26º, 36º, 50º, 70º, & 90º.
• EDLT options: 14º, 19º, & 26º, for ultra-crisp gobos.
• View photometrics guide

• Accepts 375w, 575w, or 750w HPL tungsten lamp.
• The same lamp as the ellipsoidal!
• Lens options: Very Narrow, Narrow, Medium, Wide, and Extra Wide
• Lens comparison to Par64s

Powerful output in a compact, lightweight package, these units consist of four DWE 120v 650w lamps, wired into two Edison circuits. The body of the unit is a sturdy, black anodized aluminum case with a strong, adjustable bracket. Each bank of lamps is adjustable. Clamp and safety included with each unit.

Twice the power of the "4 lite", these units house eight DWE 120v 650w lamps, wired into four stage pin circuits (thats two lamps per circuit). The body of the unit is a sturdy, black anodized aluminum case with a strong, adjustable bracket. Each bank of lamps (right side and left side) is adjustable. Clamp and safety included with each unit.

L&E's Mini-Strip™ has been referred to as the Rolls Royce™ of MR-16 striplights. It is listed as a U.L. multi-lamp striplight using a wide range of 12 volt MR-16 tungsten halogen lamps, and manufactured of aluminum. Ours are six feet long, featuring ten lamps for each of the three 750w circuits. Each circuit has 36" lead and through wires with stage pin connectors, allowing them to be easily daisy chained. Spring loaded lamp holders with push-on sockets provide secure positioning of the lamps to hold them in place while touring. The narrow profile allows it to be used on closely spaced battens or in tight spaces where a general wash of light from the top, side or bottom is desired. Clamps, trunnions, safety cables, and gel frames included.

Light weight and small, they are great for lighting tables in a hall, displays in a museum, or mirror balls for a party. Anywhere you can't afford a big heavy fixture and need a tight beam, these will save the day. We stock both 6v 30w and 12v 50w par 46 pin spots. All fixtures come with a clamp, safety, and edison power cord.

Ideal for use in small spaces, this light weight 75 watt 110v fixture maintains a low profile, and can be clipped, hung or mounted almost anywhere with ease. All of ours are black, feature an adjustable yoke, and come with clamp, gel frame, and edison power cord.

This nice little fixture is great for highlighting small areas, providing up-light on drapes, and or lighting a band on a small stage. With a 200w lamp, it still packs a punch while its smaller size offers maximum flexibility for storage and placement in smaller venues. Furthermore, the hinged rear cover allows easy for lamp access. Clamp, safety, and gel frame included. They come in both black and chrome and feature an 110v edison plug.

Four pars loaded in series onto a single bar, this fixture is a great effect for any concert.
More details coming soon.

For use with ETC Source Four Ellipsoidal or Altman Shakespeare.

The Smart Move® DMX gobo rotator by Apollo provides multi-direction rotation for one or two "B" sized round gobos. It is ideal for a broad range of applications as it can be used with or without a DMX console. When a DMX console is not present, easy to use rotary switches and speed control dial on the unit allow the user to easily set the desired effect and speed.
• 19 Pre-programmed Effects or Design-Your-Own
• Infinitely Variable Speeds from 0-21rpm, C or CW, with smooth and quiet operation.
• Optional DMX Control and Indexing

For use with ETC Source Four Ellipsoidal or Altman Shakespeare.

The City Theatrical DMX Iris is a simple way of motorizing your lighting fixture so it can change beam spreads as an effect in your show. You could have a gobo that is revealed as you open the iris, or just change the size of a pool of light on stage. Additionally, it features incolloy leaves, brass fittings to withstand heat and corrosion and is driven by a stainless steel chain. One DMX channel is used.

For use with ETC Source Four Ellipsoidal or Altman Shakespeare.

This accessory provides an additional range of special effects possibilities to the Source Four Ellipsoidal, allowing a continuous loop of motion. Built with a stainless steel housing and precision machined drive rollers, it can withstand the high heat inside the lighting fixture and remain reliable. The unique snap in design, (Patented) makes it very easy to change the FX/Loop and the large and growing collection of designs will make GAM Film/FX one of the most flexible special effects tools you have ever worked with.

For use with ETC Source Four Ellipsoidal or Altman Shakespeare.

Do more with less. Mounted on an ellipsoidal fixture, the lightweight moving mirror allows you to reposition the beam of light at will. A single luminaire can be used for multiple specials, focused wherever the designer requires and moved with a simple cue from your DMX console. This is done silently, quickly and accurately and can be repeated over and over again, every night of the performance. The ultra-quiet stepper motors used allow the I-Cue to succeed even in television studios and concert halls where any ambient motor noise is unacceptable. Read more about the I-Cue's features here.

For use with ETC Source Four Ellipsoidal or Altman Shakespeare.

Using the iPro Image Projector and a typical theatrical spotlight, project virtually any image you want - quickly, affordably, and easily. In short, the iPro Image Projector projects an image created from a simple plastic slide. Attach an iPro Slide cartridge to the back plate of the Projector and insert it into the iris slot of any one of several common luminaires. Then simply turn on the light to project anything from a dazzling full color panorama to a corporate logo, or even a last minute custom gobo texture. Even at 100% intensity, the iPro Slide will last from 15-50 hours with no fading or degradation.

For use with ETC Source Four Ellipsoidal
With this accessory for the S4 Ellipsoidal, you can project high speed xenon strobe effects with precision, and even through a gobo! To attach, you simply replace the end cap on the back of the ellipsoidal, and then attach the lightweight external power supply via a 3' umbilical cord. This power supply module (2.2lbs) can connect directly to your DMX control board and uses standard 110v Edison for power.

• Fast reccycle with 15 flashes/second at a color temperature 5600 Deg K
• Featuring single flash, burst, variable intensity and variable rate
• Microprocessor DMX-512 control on individual rates and intensities (2 channels)

Includes clamp, safety, gel frame, and barn doors. Features a Stage Pin plug.

More information coming soon!

It can clip onto a music stand or podium. 40 watts. 110v. Edison plug.

More information and picture coming soon!

See our battery powered LED version at the bottom of the LED category.