From the makers of one of the most popular professional cyc lights, Chroma-Q does it again: the multi award-winning Color Force II™, a batten that delivers formidable output and superior colour blending, all with smooth even coverage. With four powerful homogenized cells per foot/305mm, these units can be grouped and controlled to release your creativity. Unsightly color shadowing is eliminated with this innovative optical system that gives power enough to light nearly 12m of cyclorama. Perfect for a wide range of cyclorama, flood and wall washing applications where a powerful throw is needed.
72 inches / 6 feet long, with included trunnions or hanging hardware.
Over 18,000 lumens of output at full power, which can illuminate a cyc up to 12m/39ft tall.
Homogonized RGBA color mixing from 24 individually controllable 3 inch wide led pixels. There is no unsightly color shadowing like fixtures using traditional individual colored emitters.
Theater grade dimming along with a high CRI of 92.
Touch screen interface, rugged aluminum body, and built in power supply.
ACCESSORIES: The cyc light lens accessory further blends the light coming from each led pixel, for a more uniform wash when the unit is very close to the cycor surface its illuminating.
CONTROL: Can be run in standalone or controlled via dmx. 5 pin dmx in and thru. Address is set by the touch screen on the bottom of the unit.
Dmx profile can range from 1 channel, to 103 channels, depending on your needs.
POWER: Neutrik PowerCon true1 connectors, in and out. By default, EGI supplies an Edison male to true1 adapter for each unit.
800 watt draw at full. Can accept 110v or 208v power.
Note: To avoid overloading the input cable, the maximum length of Color Force fixtures for a single power cable run is 3.6m (12') at 110VAC or 7.2m (24') at 220VAC.